Thursday, June 26, 2014

intarsia tutorial - tiger's face

My Tiger pattern uses some more advanced techniques, one of which is intarsia. I like this technique for creating face markings on my toys, so I thought I would share how I work intarsia colour changes in knitting.

The piece of knitting shown in the tutorial is the head from my Tiger pattern (available on Ravelry or Etsy). Before beginning Step 1, work Rows 1-19 of the piece.

Note that you can click on any of the photos to view them in full size for more detail.

Step 1: To add a new colour at the end of the row (white, in the photo below), fold the new yarn to make a loop, about 10 cm (4") from the end. Insert your right-hand needle to make the first stitch, and place the loop over the end of the needle. Knit this loop as your first stitch. (At the end of a row, the 2 yarn ends can be tied later to stop them from coming loose)

Step 2: Here I've worked the first section in white, and now I want to change to orange. I add the new colour yarn in the same way as described in Step 1. You want to make sure you leave a long enough end on the wrong-side that it will not come loose as you knit, and so you have to enough to weave in when you're done.

Step 3: I've now worked the middle section in orange, and I want to begin another section of white. You need to use a separate piece of yarn, because you are not carrying the white along behind the orange section.

Here I've finished Row 20, and you can see the three sections of colour. (The loose yarn ends are hidden behind, and you see the three I am working with).

Step 4: I've begun Row 21, working the first white section. When I come to the place where I need to change yarn colours, I lay the first yarn (marked with blue dots) over top of the yarn I need next (marked with green dots). This way, when I pick up the orange yarn to purl the next stitch, the two yarns are twisted together. This prevents holes in the piece as you change colours.

Step 5: I've worked the orange section of Row 21, and now I'm changing to white again. You can see where the orange yarn I just used (marked with green dots) is twisted with the yarn I'm using to make the next stitch (marked with blue dots).

Step 6: I've finished Row 21, and worked Row 22. This photo shows Row 23, where I am changing from white to orange. You can see how the two colours were twisted together in previous rows. This makes a sort of seam between the two sections of colour. Practice will help you maintain an even tension as you change colours.

Here I have completed the 6 rows of intarsia. The right side looks nice and tidy. If your tension is not quite even, you can try gently pulling on the stitches with your needle tip, to even out the tension over the row. Blocking will also help. If it is very uneven, it is worth a little extra time to redo it, and get some more practice (I've done this a lot!)

Here is the piece from the wrong side. You can see more clearly now where the two yarn colours are twisted together. This simple technique is how I work intarsia.

In this photo, I've worked the last row of the head, cut the yarn, and threaded the end through the stitches to gather them together. It's looking a little more like the tiger's head now.

Step 7: Before you can finish the head, you need to weave in the yarn ends from the intarsia sections. If done incorrectly, you will get holes on the right side. A good way to start is to make a short stitch to the side of your yarn end, in the direction of the next colour. Check on the right side, to make sure any holes have been closed. 

Step 8: Then weave in the yarn end securely, using your preferred method. I like to thread the end along a row of purl stitch bumps, working towards the side of the piece. Then I can tie them off as I sew the seam. Other ends are woven in so they won't show on the right side.

Now you can attach safety eyes or buttons, sew up the seam, and stuff the head. 
Some other tutorials that might be useful: soft sculpture to give the face more character, and how to embroider the nose and mouth.

Here is what the finished toy will look like! I hope you've found this tutorial useful. If you want more help with this technique, there are many video tutorials. A search for "intarsia knitting" should find something that works for you.








Tuesday, June 3, 2014

June featured pattern - Tiger

The tiger is another one of my very first patterns, published just a couple months after I started Fuzzy Mitten in November of 2006. I don't really remember why I wanted to design a tiger, but it was based heavily on my Tabby Kitty pattern. Looking at the photos now, I clearly didn't even check out photos of real tigers to see how their ears are shaped, or what colour their eyes are! Despite this, it's always been a popular design, and even more so when I updated the pattern for the second edition of Fuzzy Knits.


Originally the tiger had larger, cat-shaped ears, an entirely white nose, and more white on it's paws. The outfit in the pattern was a simple dress made from identical front and back, held together at the shoulders with a crocheted edging and buttons. This version is still available in the book Stitch 'n Bitch Superstar. While the book was waiting to be published, I designed the newer version and offered it to the editor, thinking it would be more appropriate for the book. They liked the original one better, however; so it's still out there, if you feel like finding the book at your local library or book store.


I really love the changes I made to the tiger, though. I wanted one of the patterns in Fuzzy Knits to have some more advanced techniques, but used in a way that seemed approachable. Now the tiger has small, round ears in the right colours. A white chin gives you a chance to try out a little intarsia. Plus, she has a lovely summer dress, knit in the round with a colour-work design.


Here's another tiger I knit as a custom order, in a dress with a different pattern. (You can also knit the dress in a single yarn, like this one done in a striping sock yarn).


And one last tiger for you: Rudyard, whom I knit for a plush toy show several years ago. He's got lovely whiskers done in a white eyelash yarn, and the jacket and waistcoat from my bunny pattern.

If you'd like to make your own tiger, the pattern is 50% off for the month of June. Find it on Etsy or Ravlery (here you get the discount at check-out).